FA-FSC-VH2/48, Dome Type 48 Fibers Heat Shrinkable Optical Cable Splice Joint Enclosure
Main Characteristics of FA-FSC-VH2/48 Fiber Splice Closure
1, Temperature: -40 to +65℃;
2, Atmosphere: 100Kpa± 5kpa;
3, Sealing property at normal temperature: Internal pressure: 100Kpa± 5kpa , without decrease in 24 hours;
4, High temperature sealing property: internal pressure: 60Kpa± 5kpa, without decrease in 24 hours at 60℃;
5, Insulated resistance: ≥2×104MΩ;
6, Intensity: 15KV (DC) not being broken down, has no flying arc within 1 minutes;
7, Additional loss: No additional loss when optical fibers are winded in the splice trays;
8, Aging time of the enclosure material is longer than 20 years.
Main Components Of FA-FSC-VH2/48 Optical Cable Joint Closure
| No. | Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height x Diameter
355mm x 150mm |
| 2 | Fiber optic splice tray (FOST) | Max. 6 trays (bunchy)
Max. 4 trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces) |
| 3 | Fiber holding tray | 1 pcs | Holding fibers with protective coat | |
| 4 | Base | 1set | Fixing internal and external structure | |
| 5 | Plastic hoop | 1 set | Fixing between FOSC cover and base | |
| 6 | Seal fitting | 1 piece | Sealing between FOSC cover and base | |
| 7 | Pressure testing valve | 1 set | After inject air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| 8 | Earthing deriving device | 1 set | Deriving metal parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
Main accessories and special tools
| No. | Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | 48pcs | Protecting fiber splices | Configuration as per capacity |
| 2 | Nylon tie | | Fixing fiber with protective coat | Configuration as per capacity |
| 3 | Heat shrinkable fixing sleeve (single) | | Fixing and sealing single fiber cable | Configuration as per requirement |
| 4 | Heat shrinkable fixing sleeve (mass) | | Fixing and sealing mass of fiber cable | Configuration as per requirement |
| 5 | Branching clip | | Branching fiber cables | Configuration as per requirement |
| 6 | Earthing wire | 1 piece | Putting through between earthing devices | |
| 7 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air | |
| 8 | Labeling paper | 1 piece | Labeling fibers | |
| 9 | Special wrench | 1 piece | Tightening nut of reinforced core | |
| 10 | Metal hoop | 1 set | For wall mounting and pole hugging | |
| 11 | Buffer tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| 12 | Aluminum-foil paper | 1 piece | Protect the bottom of FOSC | |
|
|
Dome Type 48 Fibers Heat Shrinkable Optical Cable Splice Joint Closure for Duct Images
|
